Products

Composites / External Mold Releases / Cast Polymers/Marble

Products

The products below represent those that are most commonly used, but not all of the products that AXEL offers. Please contact us for additional assistance in identifying the best product for your application.

  

Product Number

Application Technique/Temperature

Type of Mold

Features

Yields

Semi-Permanent
Release
XTEND®

Solvent-based

818

Wipe on. NO Wipe off
Apply at ambient

Mold up to 450°F/232°C 

FRP, Glass, Metal, Laminate

Good for high production parts with gel coat

Class “A”

832

Wipe on/Wipe off for Very high gloss
Wipe on/Let dry for Good gloss
Apply at ambient or up to 150°F/66°C 

Mold up to 450°F/232°C

FRP, Glass, Metal, Laminate

Easy application.
Self -cleaning.
Good slip for gel coated bowls, tubs etc.

Class “A”

858

Spray on at ambient or up to 150°F/66°C
Can also be wiped on

Mold up to 450°F/232°C

FRP, Glass, Metal, Laminate

High gloss spray for large gel coated parts

Class “A”

1050

Wipe on. NO Wipe off
Apply at ambient
Use XTR sealer before applying 

Mold up to 450°F/232°C

FRP, Glass, Metal, Laminate

Easiest, streak free application. 
Resists hazing in high production. 

Class “A”

1080

Wipe on. NO Wipe off
Apply at ambient

Mold up to 450°F/232°C 

FRP, Glass, Metal, Laminate

Good for high production parts with gel coat

Class “A”

1110

Wipe on/Wipe off for Very high gloss
Wipe on/Let dry for Good gloss
Apply at ambient or up to 150°F/66°C 

Mold up to 450°F/232°C

FRP, Glass, Metal, Laminate

Easy application.
Self -cleaning.
Good slip for gel coated bowls, tubs etc.

Class “A”

19ZAM

Wipe or spray on at ambient

Mold up to 450°F/232°C

FRP, Glass, Metal, Laminate

Long lasting durable release for solid surface parts with no gel coat

Medium cosmetics

19RSS

Wipe or spray on. Bake at100°F/38°C - 150°F/66°C before molding

Mold up to 450°F/232°C

FRP, Glass, Metal, Laminate

Long lasting durable release for solid surface parts with no gel coat.

Preferred release for MMA (acrylate) modified resin

Medium cosmetics

Water-based

W-102

Wipe on and polish off at ambient temperature.

Mold up to 450°F/232°C 

FRP

100% water-based

High gloss
When applied over XTR sealer

 

Polymeric
Release
MoldWiz®

Solvent-based

250SL/
55NC

Wipe on/wet polish

FRP, Glass, Metal, Laminate

Self -stripping  mold release cleans wax and clay marks.

Especially for custom molding.
Easy to tape

High gloss

MWM

Sacrificial release.
Apply before each part, preferably by spray.

FRP molds

Creates temporary matte finish  on molds. Imparts a permanent matte finish on parts.

Matte finish

 

PasteWiz

Solvent-based

PasteWiz

PasteWiz HC

Wipe on and polish

 

Hot climate formula

All including porous

Easy to polish paste wax

High gloss

Download a printer-friendly PDF:

Solutions for Composites: External Mold Releases

This information is supplied for technically skilled professionals working at their own risk. AXEL believes the information to be accurate, although the Company assumes no liability in the validity of the information for any specific process or application. Moreover, AXEL will assume no liability from any direct and/or consequential damages of any kind that may occur from the use or non-use of AXEL products or information supplied by the Company or its appointed representatives.