Products

Composites / External Mold Releases / Filament Winding

Products

The products below represent those that are most commonly used, but not all of the products that AXEL offers. Please contact us for additional assistance in identifying the best product for your application.

  

Product Number

Application Technique/Temperature

Type of Mold

Features

Yields

Semi-Permanent
Release
XTEND®

Solvent-based

19ZAM

Wipe or spray on at ambient
Preferred when ambient temperature is 60°F/16°C or less

 

Mold up to 450°F/232°C

FRP, Epoxy
Metal

Durable release for most thermoset resins

Medium cosmetics

19RSS

Wipe on ambient or spray on at or up to 250°F/121°C

Mold up to 450°F/232°C 

FRP, Epoxy,
Metal

Durable release for most thermoset resins

Medium cosmetics

Polymeric
Release
MoldWiz®

Solvent-based

F-23A/NC

F-23A/NA

Apply at ambient temperatrure.

Wipe on. Wet polish if desired

Spray or wipe on at ambient  or elevated temperature up to 350°F-177°F

FRP, Metal

All mandrels in good condition.  Do not use on porous absorbent materials like wood.

Fluoropolymer release provides a wet slippery film

Medium-high gloss

Water-based

WB-2700

Spray or wipe on at ambient  or elevated temperature up to 350°F-177°F

Sacrificial release

Can be diluted

FRP, Epoxy, Metal

All mandrels in good condition.  Do not use on porous absorbent materials like wood.

Excellent release for epoxy(wet layup and pre-preg),polyester and vinyl ester.

Recommended for pipe and fitting production

Low-medium gloss

Download a printer-friendly PDF:

Solutions for Composites: External Mold Releases

This information is supplied for technically skilled professionals working at their own risk. AXEL believes the information to be accurate, although the Company assumes no liability in the validity of the information for any specific process or application. Moreover, AXEL will assume no liability from any direct and/or consequential damages of any kind that may occur from the use or non-use of AXEL products or information supplied by the Company or its appointed representatives.