Products

Composites / External Mold Releases / Open Molding/Bag Molding

Products

The products below represent those that are most commonly used, but not all of the products that AXEL offers. Please contact us for additional assistance in identifying the best product for your application.

  

Product Number

Application Technique/Temperature

Type of Mold

Features

Yields

Semi-Permanent
Release
XTEND®

Solvent-based

818

Wipe on. NO Wipe off
Apply at ambient

Mold up to 450°F/232°C 

All

Non-porous

Quickest application.

For polyester or vinyl ester

Good gloss and no pre-release

Class “A”

832

Wipe on/Wipe off for Very high gloss

Wipe on/Let dry for Good gloss

Apply at ambient or up to 150°F/66°C
Mold up to 450°F/232°C 

All

Non-porous

Good release for epoxy.

Easy application. Self-cleaning.

Good slip. Good in hot climates or on warm molds

 

Class “A”

858

Spray on at ambient or up to 150°F/66°C

Can also be wiped on
Mold up to 450°F/232°C

All

Non-porous

High gloss spray

Class “A”

1050

Wipe on. NO Wipe off
Apply at ambient
Use XTR sealer before application 

Mold up to 450°F/232°C

All

Non-porous

Excellent gloss. Easy streak free application. Resists hazing in production.

 

Class “A”

1080

Wipe on. NO Wipe off
Apply at ambient

Mold up to 450°F/232°C 

All

Non-porous

Quickest application.

For polyester or vinyl ester

Good gloss and no pre-release

Class “A”

1110

Wipe on/Wipe off for Very high gloss

Wipe on/Let dry for Good gloss

Apply at ambient or up to 150°F/66°C
Mold up to 450°F/232°C 

All

Non-porous

Good release for epoxy.

Easy application. Self-cleaning.

Good slip. Good in hot climates or on warm molds

 

Class “A”

19ZAM

Wipe or spray on at ambient

Mold up to 450°F/232°C 

All.

Especially epoxy or aluminum

Can be used on vacuum bags

Long lasting durable release with medium cosmetics.

Especially for non-gel-coated or primer gel-coated parts

Extends life of silicone bags

Medium cosmetics

19RSS

Wipe or spray on warm molds

Apply at 100°F/38°C or up to 150°F/66°C
Mold up to 450°F/232°C 

All.

Especially epoxy or aluminum

Can be used on vacuum bags

Long lasting durable release with medium cosmetics.

Especially for non-gel-coated or primer gel-coated parts

Extends life of silicone bags

Medium cosmetics

Water-based

W-102

Wipe on and polish off at ambient temperature.

Mold up to 450°F/232°C 

All

100% water-based

High gloss

When applied on XTR sealer

 

Polymeric
Release
MoldWiz®

Solvent-based

F-57/NC

F-57L/NA

Wipe at ambient

Wipe on/wet polish for high gloss. Can also be sprayed.

“L” formulation has increased luster

All

Contains fluropolymer.

Available in aerosol or bulk liquid.

High gloss if polished

MWM

Sacrificial release, apply before each part, preferably by spray.

FRP

Creates temporary matte surface on molds. Imparts permanent matte finish on parts.

Matte

Water-based

WB-2700

Wipe or spray at ambient or higher

Mold up to 450°F/232°C 

 

High slip release

Good for epoxy and difficult release

Not cosmetic

Download a printer-friendly PDF:

Solutions for Composites: External Mold Releases

This information is supplied for technically skilled professionals working at their own risk. AXEL believes the information to be accurate, although the Company assumes no liability in the validity of the information for any specific process or application. Moreover, AXEL will assume no liability from any direct and/or consequential damages of any kind that may occur from the use or non-use of AXEL products or information supplied by the Company or its appointed representatives.