Products

Thermoplastics / Injection Molding / Process Aid Additives

Products

PLEASE NOTE: These are just a sampling of the additives that AXEL provides and are listed based on their most common use and performance. AXEL additives are multifunctional. For additional assistance in selecting the best product, or if you don’t see what you need, please contact us at info@axelplastics.com

Normal addition levels are 0.1 – 1.0% by weight. For injection molding typical addition level is 0.3-0.5%. For masterbatch production higher addition rates may be used. For additives specifically for scratch and mar reduction 1-3% addition may be required.

*For dispersion of fillers or pigment in masterbatch production, please also refer to the table for DISPERSION ADDITIVES

1Raw materials used in these formulations conform to USFDA 21CFR 175.300 and EU directives 2002/72/EC and 2005/79/EU and are safe for use in plastics or films that come in contact with food.

Primary Functionality  Secondary Functionality ● Tertiary Functionality / Form: P = powder PT = pellet L= liquid

Resin Type

MoldWiz®
Product Number

COMMON PROCESSING REQUIREMENTS

Form

Rheology
(Flow)

Mold Release

Scratch/Mar
Reduction

Reduced 
Co-efficient
of Friction

*
Dispersion

ABS

INT-34DLK1

-

-

P, PL

INT-33LCA1

-

-

P, PT

INT-EQ6

-

-

-

L

CAB

INT-34DLK1

P, PT

INT-33LCA1

-

-

P, PT

LCP

INT-55PV

-

-

-

P, PT

PA

INT-38HM1

P, PT

INT-38F

     

P, PT

INT-PA33FRK

L

PBT, PET

and blends

INT-36PBT

P, PT

INT-40GHT1

-

-

L

PC (Clear)

INT-619C

P, PT

INT-33UDS1

P, PT

PC &

PC Blends

  

INT-619

-

P, PT

INT-33UDS1

 -

 
PC/ABS

INT-35UDH

  - - -  

INT-35UPC

-

-

-

P, PT

PE, HDPE,

LDPE, LLDPE

INT-33LCA1

-

P, PT

INT-41TPD

-

-

PT

INT-3952R

-

-

L

PES

INT-619

-

P, PT

INT-55PV

-

-

-

P, PT

ACRYLIC

INT-33UDS1

-

-

-

P, PT

INT-34DLK1

-

-

-

P, PT

POM

INT-619

-

P, PT

INT-33UDS1

-

-

-

P, PT

PP

INT-33LCA1

 

-

-

-

P, PT

INT-41TPD

-

-

PT

INT-619

 

-

-

-

P, PT

INT-701TPD

 

P, PT

INT-3952R

-

-

L

INT-937

-

-

-

L

PPO

INT-619

-

P, PT

INT-33UDS1

-

-

-

P, PT

PPS

INT-619

-

-

-

P, PT

INT-33UDS1

-

-

-

P, PT

PS

INT-33LCA1

-

-

P, PT

INT-3952R

-

-

L

INT-937

-

-

-

L

INT-EQ6

-

-

-

L

HIPS, CPS

INT-34DLK1

-

P, PT

INT-33UDS1

 - P, PT

PSO

INT-619

-

P, PT

INT-33UDS1

-

-

-

P, PT

PVC

INT-66PV

-

-

P, PT

INT-VP250

-

-

-

L

SAN

INT-34DLK1

-

-

 

P, PT

INT-33LCA1

 

 

 

P, PT

SBS

INT-34DLK1

-

-

P, PT

TPE

INT-34DLK1

-

-

P, PT

INT-33LCA1

-

P, PT

INT-937

-

-

L

TPO

INT-33LCA1

P, PT

INT-701TPD

P, PT

INT-706S

L

TPU

INT-34DLK1

-

-

P, PT

INT-33LCA1

-

-

P, PT

DISPERSION AIDS / THERMOPLASTICS

 

INT-40GHT1

Low viscosity; water clear liquid improves wetting and dispersion . Also provides release when used in masterbatch production.

L

INT-40DHT1

Useful for surface treating Ti02 and many other fillers to improve dispersion and or to increase loading in masterbatch production

P

     

Download a printer-friendly PDF:

Solutions for Thermoplastics

This information is supplied for technically skilled professionals working at their own risk. AXEL believes the information to be accurate, although the Company assumes no liability in the validity of the information for any specific process or application. Moreover, AXEL will assume no liability from any direct and/or consequential damages of any kind that may occur from the use or non-use of AXEL products or information supplied by the Company or its appointed representatives.