Products

Special Markets / Wind Energy

Products

AXEL provides a variety of proprietary, water and solvent based semi-permanent releases systems to meet the molding requirements of blade, hub and nacelle production.

Semi-Permanent Mold Release Systems (water-based)

 

Product
Number

Used For

Features

Application Technique

CleanWiz®

WCX

Removing release and residue from molds

100% water-based
For epoxy, FRP, or metal molds
Completely strips semi-perms

Use at ambient temperature. Scrub over mold surface and wash off with water.

XTEND®

WS-50

Resin infused blades.
For epoxy, FRP, or metal molds

100% water-based
Recommended for epoxy resin infused blades

Spray or wipe on. Bake at process temperature for a minimum of 15 minutes after final application.

W-7838D

Resin infused blades. Matte finish mold release

100% water-based
Recommended for epoxy resin infused blades

Wipe on. Bake at process temperature for a minimum of 15 minutes after final application.

WHS

Difficult release areas

100% water-based
Useful for spot treatment of areas that have release problems

Wipe on, let dry

 

Semi-Permanent Mold Primer (solvent-based)

 

Product
Number

Used For

Features

Application Technique

XTEND®

PR-20

Sealing porosity in epoxy blade molds; restoring worn tooling

Solvent-based primer has NO release properties. If needed, use before sealer and release.

Apply by spraying or wiping.

 

Semi-Permanent Mold Release Systems (solvent-based)

 

Product
Number

Used For

Features

Application Technique

CleanWiz®

CX-500

General purpose mold cleaner. Quick flashing

Quick cleaning.

Wipe on liberally and wipe off before dry.

XTEND®

XTR

Mold Sealer Nacelles;
Blades: polyester or vinyl ester infusion

Protects new molds. Improves release performance

Wipe on/polish lightly if desired.

818

Mold Release Nacelles;
Blades: polyester or vinyl ester infusion

Fast, easy application. Quick drying.

Wipe on and let dry. No wipe off or polishing required.

832

Mold Release Nacelles;
Blades: Nacelles;
Blades: polyester, vinyl ester, or direct epoxy infusion.

Good slip.

Wipe-on/wipe-off for high gloss
Wipe-on and let dry for medium cosmetics.

19RSS

Mold Release compression molding hub parts

High slip and great durability Medium cosmetics

Wipe or Spray on and let dry

This information is supplied for technically skilled professionals working at their own risk. AXEL believes the information to be accurate, although the Company assumes no liability in the validity of the information for any specific process or application. Moreover, AXEL will assume no liability from any direct and/or consequential damages of any kind that may occur from the use or non-use of AXEL products or information supplied by the Company or its appointed representatives.