Composites / External Mold Releases / Filament Winding

The products below represent those that are most commonly used, but not all of the products that AXEL offers. Please contact us for additional assistance in identifying the best product for your application.

Download the brochure:
Solutions for Composites: External Mold Releases

Brand Base Product Number Application Technique/Temperature Type of Mold Features Yields
Polymeric Release MoldWiz® Water-based WB-2700 Spray or wipe on at ambient or elevated temperature up to 350°F-177°C. Sacrificial release. Can be diluted. FRP, Epoxy, Metal All mandrels in good condition. Do not use on porous absorbent materials like wood. Excellent release for epoxy(wet layup and pre-preg),polyester and vinyl ester. Recommended for pipe and fitting production Low-medium gloss
Polymeric Release MoldWiz® Water-based W-HGS Spray or wipe on at ambient or elevated temperature up to 400°F/204°C. Sacrificial release. Can be diluted. FRP, Epoxy, Metal All mandrels in good condition. Do not use on porous absorbent materials like wood. Excellent release for epoxy(wet layup and pre-preg),polyester and vinyl ester. Recommended for pipe and fitting production Low-medium gloss
Polymeric Release MoldWiz® Solvent-based F-23A/NC F-23A/NA Apply at ambient temperature. Wipe on. Wet polish if desired. Spray or wipe on at ambient or elevated temperature up to 350°F-177°C. FRP, Metal All mandrels in good condition. Do not use on porous absorbent materials like wood. Fluoropolymer release provides a wet slippery film Medium-high gloss
Polymeric Release MoldWiz® Water-based WB-2700 Spray or wipe on at ambient or elevated temperature up to 350°F-177°C. Sacrificial release. Can be diluted. FRP, Epoxy, Metal All mandrels in good condition. Do not use on porous absorbent materials like wood. Excellent release for epoxy(wet layup and pre-preg),polyester and vinyl ester. Recommended for pipe and fitting production Low-medium gloss