AXEL provides a variety of proprietary release products to meet the requirements of the friction and abrasive markets including production of grinding and cutting wheels; brake pads; clutch plates; and other similar products. The following is a list of AXEL products that are most commonly used:
Many other internal mold releases are available in powder and liquid form. Please contact us regarding internal mold releases for other types of resin.
|Brand||Type||Product Number||Used For||Features||Application Technique|
|MoldWiz®||Water-Based||WB-B25||Brake pads and clutch plates used on all types of metal molds for compression molding abrasive mixes with, epoxy; phenolic; MMA; polyester; or rubber binders.||100% water-based. Highly economical. 20% active – dilute with water up to 30:1.||Spray or wipe on molds. Will dry instantly on hot molds. Apply before each pressing|
|MoldWiz®||Water-Based||EM-1212||Hot or cold press organic abrasives including binders of epoxy, phenolic, and rubbers. Suitable for open or closed surface part production.||100% water-based 12% active. Dilute with water if desired.||Spray or wipe on. Allow to dry before molding. Apply before each casting or pressing.|
|MoldWiz®||Water-Based||EM-1212SL||Hot or cold press organic abrasives including binders of epoxy, phenolic, and rubbers. Suitable for open or closed surface part production.||EM-1212 formula but with higher slip.|
|MoldWiz®||Solvent-Based||MSO-30||Cold press molding vitreous abrasives. Suitable for open or closed surface part production.||Leaves a wet slippery release film on surfaces. Will not interfere with firing.||Wipe or spray on. Does not need to be dry before molding.|
|MoldWiz®||Internal||INT-326PWD||Internal mold release additive in hexa-cured phenolic resin powder form.||Small addition greatly improves release of parts. Reduces external release requirements.||Generally effective at 1% of resin weight, although higher loading can be used if desired.|