The products below represent those that are most commonly used, but not all of the products that AXEL offers. Please contact us for additional assistance in identifying the best product for your application.
Download the brochure: Solutions for Rubber
|Brand||Base||Product Number||Application Technique/Temperature||Type of Mold||Features|
|Semi-Permanent Release XTEND®||Solvent-based||21HT||Spray or wipe on. Bake initial application at process temperature.||All||Long lasting. Can be used at process temperatures up to 700°F/427°C Do not use to mold silicone elastomers.|
|Semi-Permanent Release XTEND®||Solvent-based||19RSS||Spray or wipe on at up to 140°F/70°C.
Can be used to mold at up to 400°F/205°C
|All including Silicone||Periodic application extends life of silicone molds. Reduces tear outs. Do not use to mold silicone elastomers.|
|Semi-Permanent Release XTEND®||Water-based||W-4008B/HT1||Spray or wipe on hot molds, 350°F/177°C and bake initial application for best results.||All||Long lasting. Can be used at process temperatures up to 800°F/538°C. Do not use to mold silicone elastomers.|
|Semi-Permanent Release XTEND®||Water-based||W-3236R||Spray or wipe on at ambient temp or higher.||All||Especially suited to releasing soft elastomers and foams, including silicone. Variant available that is suitable for molding food-grade products.|
|Semi-Permanent Release XTEND®||Water-based||W-7283R||Spray or wipe on at ambient temp or higher.||All||Good general purpose rubber release. Excellent for EPDM. Not for silicone. Can be diluted.|
|Polymeric Release MoldWiz®||Solvent-based||F-57/NC||Spray or wipe at ambient temp or higher.||All||Contains fluropolymer. Available in aerosol or bulk liquid. Can be used for silicone rubber.|
|Polymeric Release MoldWiz®||Solvent-based||AZN||Spray or wipe at ambient temp or higher.||All||Especially suitable for molding EPDM.|
|Polymeric Release MoldWiz®||Water-based||EM-303SF/2||Spray or wipe at ambient temp or higher.||All||Good for molding fluoroeslatomers.|
|Polymeric Release MoldWiz®||Water-based||WB-GR50||Spray or wipe at ambient temp or higher.||All||Barrier release for silicone molds.|