Thermoplastics / Injection Molding / Process Aid Additives

These are just a sampling of the additives that AXEL provides and are listed based on their most common use and performance. AXEL additives are multifunctional. For additional assistance in selecting the best product, or if you don’t see what you need, please contact us at info@axelplastics.com

Download the brochure:

Solutions for Thermoplastics

Normal addition levels are 0.1 – 1.0% by weight. For injection molding typical addition level is 0.3-0.5%. For masterbatch production higher addition rates may be used. For additives specifically for scratch and mar reduction 1-3% addition may be required.

* For dispersion of fillers or pigment in masterbatch production, please also refer to the table for DISPERSION ADDITIVES

1 Raw materials used in these formulations conform to USFDA 21CFR 175.300 and EU directives 2002/72/EC and 2005/79/EU and are safe for use in plastics or films that come in contact with food.

■ Primary Functionality △ Secondary Functionality ● Tertiary Functionality / Form: P = powder PT = pellet L= liquid

Resin Type MoldWiz® Product Number COMMON PROCESSING REQUIREMENTS Form
Rheology (Flow) Mold Release Scratch/Mar Reduction Reduced Co-efficient of Friction * Dispersion
ABS INT-34DLK1 P, PL
ABS INT-33LCA1 P, PT
ABS INT-EQ6 L
CAB INT-34DLK1 P, PT
INT-33LCA1 P, PT
LCP INT-55PV P, PT
PA INT-38HM1 P, PT
PA INT-38F P, PT
PA INT-PA33FRK L
PBT, PET and blends INT-36PBT P, PT
PBT, PET and blends INT-40GHT1 L
PC (Clear) INT-619C P, PT
PC (Clear) INT-33UDS1 P, PT
PC & PC Blends INT-619 P, PT
PC & PC Blends INT-33UDS1  –
PC/ABS INT-35UDH
PC/ABS INT-35UPC P, PT
PE, HDPE, LDPE, LLDPE INT-33LCA1 P, PT
PE, HDPE, LDPE, LLDPE INT-41TPD PT
PE, HDPE, LDPE, LLDPE INT-3952R L
PES INT-619 P, PT
PES INT-55PV P, PT
ACRYLIC INT-33UDS1 P, PT
ACRYLIC INT-34DLK1 P, PT
POM INT-619 P, PT
POM INT-33UDS1 P, PT
PP INT-33LCA1  ■ P, PT
PP INT-41TPD PT
PP INT-619  ■ P, PT
PP INT-701TPD  ● P, PT
PP INT-3952R L
PP INT-937 L
PPO INT-619 P, PT
PPO INT-33UDS1 P, PT
PPS INT-619 P, PT
PPS INT-33UDS1 P, PT
PS INT-33LCA1 P, PT
PS INT-3952R L
PS INT-937 L
PS INT-EQ6 L
HIPS, CPS INT-34DLK1 P, PT
HIPS, CPS INT-33UDS1  – P, PT
PSO INT-619 P, PT
PSO INT-33UDS1 P, PT
PVC INT-66PV P, PT
PVC INT-VP250 L
SAN INT-34DLK1 P, PT
SAN INT-33LCA1 P, PT
SBS INT-34DLK1 P, PT
TPE INT-34DLK1 P, PT
TPE INT-33LCA1 P, PT
TPE INT-937 L
TPO INT-33LCA1 P, PT
TPO INT-701TPD P, PT
TPO INT-706S L
TPU INT-34DLK1 P, PT
TPU INT-33LCA1 P, PT
MoldWiz® Product Number DISPERSION AIDS / THERMOPLASTICS
INT-40GHT1 Low viscosity; water clear liquid improves wetting and dispersion . Also provides release when used in masterbatch production. L
INT-40DHT1 Useful for surface treating Ti02 and many other fillers to improve dispersion and or to increase loading in masterbatch production P