These are just a sampling of the additives that AXEL provides and are listed based on their most common use and performance. AXEL additives are multifunctional. For additional assistance in selecting the best product, or if you don’t see what you need, please contact us at info@axelplastics.com
Download the brochure: Solutions for Thermoplastics
Normal addition levels are 0.1 – 1.0% by weight. For injection molding typical addition level is 0.3-0.5%. For masterbatch production higher addition rates may be used. For additives specifically for scratch and mar reduction 1-3% addition may be required.
* For dispersion of fillers or pigment in masterbatch production, please also refer to the table for DISPERSION ADDITIVES
1 Raw materials used in these formulations conform to USFDA 21CFR 175.300 and EU directives 2002/72/EC and 2005/79/EU and are safe for use in plastics or films that come in contact with food.
■ Primary Functionality △ Secondary Functionality ● Tertiary Functionality / Form: P = powder PT = pellet L= liquid
| Resin Type | MoldWiz® Product Number | COMMON PROCESSING REQUIREMENTS | Form | ||||
|---|---|---|---|---|---|---|---|
| Rheology (Flow) | Mold Release | Scratch/Mar Reduction | Reduced Co-efficient of Friction | * Dispersion | |||
| ABS | INT-34DLK1 | ■ | △ | – | – | ● | P, PL |
| ABS | INT-33LCA1 | △ | ■ | – | ● | – | P, PT |
| ABS | INT-EQ6 | △ | ■ | – | – | – | L |
| CAB | INT-34DLK1 | ■ | △ | ● | ● | ● | P, PT |
| INT-33LCA1 | △ | ■ | – | ● | – | P, PT | |
| LCP | INT-55PV | △ | ■ | – | – | – | P, PT |
| PA | INT-38HM1 | △ | ■ | ● | ● | ● | P, PT |
| PA | INT-38F | ■ | △ | – | – | – | P, PT |
| PA | INT-PA33FRK | ■ | ■ | ● | ● | ● | L |
| PBT, PET and blends | INT-36PBT | △ | ■ | ● | △ | ● | P, PT |
| PBT, PET and blends | INT-40GHT1 | ■ | ■ | – | – | ■ | L |
| PC (Clear) | INT-33UDS1 | △ | ■ | △ | △ | △ | P, PT |
| PC & PC Blends | INT-619 | △ | ■ | ■ | ● | – | P, PT |
| PC & PC Blends | INT-33UDS1 | △ | ■ | – | – | – | |
| PC/ABS | INT-35UDH | △ | ■ | – | – | – | |
| PC/ABS | INT-35UPC | △ | ■ | – | – | – | P, PT |
| PE, HDPE, LDPE, LLDPE | INT-33LCA1 | △ | ■ | – | △ | ● | P, PT |
| PE, HDPE, LDPE, LLDPE | INT-41TPD | ■ | △ | – | – | ● | PT |
| PE, HDPE, LDPE, LLDPE | INT-3952R | △ | ■ | – | – | ● | L |
| PES | INT-619 | ■ | △ | ■ | ● | – | P, PT |
| PES | INT-55PV | ■ | △ | – | – | – | P, PT |
| ACRYLIC | INT-33UDS1 | △ | ■ | – | – | – | P, PT |
| ACRYLIC | INT-34DLK1 | △ | ■ | – | – | – | P, PT |
| POM | INT-619 | △ | ■ | ■ | ● | – | P, PT |
| POM | INT-33UDS1 | ■ | △ | – | – | – | P, PT |
| PP | INT-33LCA1 | △ | ■ | – | – | – | P, PT |
| PP | INT-41TPD | ■ | △ | – | – | ● | PT |
| PP | INT-619 | ■ | △ | – | – | – | P, PT |
| PP | INT-701TPD | ■ | △ | ■ | ● | – | P, PT |
| PP | INT-3952R | △ | ■ | – | – | ● | L |
| PP | INT-937 | △ | ■ | – | – | – | L |
| PPO | INT-619 | ■ | △ | ■ | ● | – | P, PT |
| PPO | INT-33UDS1 | △ | ■ | – | – | – | P, PT |
| PPS | INT-619 | ■ | △ | – | – | – | P, PT |
| PPS | INT-33UDS1 | △ | ■ | – | – | – | P, PT |
| PS | INT-33LCA1 | △ | ■ | – | △ | – | P, PT |
| PS | INT-3952R | △ | ■ | – | – | ● | L |
| PS | INT-937 | △ | ■ | – | – | – | L |
| PS | INT-EQ6 | △ | ■ | – | – | – | L |
| HIPS, CPS | INT-34DLK1 | ■ | ■ | – | ● | ● | P, PT |
| HIPS, CPS | INT-33UDS1 | △ | ■ | ● | – | – | P, PT |
| PSO | INT-619 | ■ | △ | ■ | ● | – | P, PT |
| PSO | INT-33UDS1 | △ | ■ | – | – | – | P, PT |
| PVC | INT-66PV | ■ | ■ | – | – | △ | P, PT |
| PVC | INT-VP250 | ■ | ■ | – | – | – | L |
| SAN | INT-34DLK1 | △ | ■ | – | – | P, PT | |
| SAN | INT-33LCA1 | △ | ■ | – | – | – | P, PT |
| SBS | INT-34DLK1 | △ | ■ | – | – | △ | P, PT |
| TPE | INT-34DLK1 | ■ | ■ | – | – | ● | P, PT |
| TPE | INT-33LCA1 | △ | ■ | – | △ | ● | P, PT |
| TPE | INT-937 | △ | ■ | – | – | ● | L |
| TPO | INT-33LCA1 | △ | ■ | ● | △ | ● | P, PT |
| TPO | INT-701TPD | ■ | △ | ■ | ■ | △ | P, PT |
| TPO | INT-706S | ■ | △ | ■ | ■ | △ | L |
| TPU | INT-34DLK1 | ■ | △ | – | – | △ | P, PT |
| TPU | INT-33LCA1 | △ | ■ | – | – | ● | P, PT |
| MoldWiz® Product Number | DISPERSION AIDS / THERMOPLASTICS | |
| INT-40GHT1 | Low viscosity; water clear liquid improves wetting and dispersion . Also provides release when used in masterbatch production. | L |
| INT-40DHT1 | Useful for surface treating Ti02 and many other fillers to improve dispersion and or to increase loading in masterbatch production | P |